Wurth katalog proizvoda

MWF - 10/11 -02734 - © Tallow-drop with AW ® drive Faster than any twist drill bit – Reduces installation costs by at least 50%. • Galvanized steel, blue passivated (A3K) • A2 (only for use in aluminum and plastic) • Equipment pack: 1 Bit For elongated joint screwing of: Sheet-steel proles and sheet-aluminum proles. • Drilling, thread forming, screwing – everything in one step. • Considerably reduced time and effort. • Exact drilling diameter for each screw connection, resulting in minimization of thread tolerance → always an optimum connection. • Avoidance of installation errors. • Optimum torque transfer thanks to innovative AW ® drive. AW ® drive system: • Improved torque transmission. • Longer service life. • Optimum centering. • Improved installation rate thanks to fatigue-free screwing in; the required contact pressure for torque transmission is considerably lower. • Largest possible contact surface of bit in screw drive. • Even force distribution prevents damaging of the surface-protection coating and therefore ensures better resistance to corrosion. Nominal dia. d in mm 2.9 3.5 3.9 4.2 4.8 5.5 Head dia. d k in mm 5.3 6.9 7.5 8.0 9.5 10.8 k in mm 2.6 2.75 3.10 3.45 3.85 3.95 l p in mm 2.5 3.0 3.1 3.7 4.5 5.7 Drive AW10 AW10 AW20 AW20 AW25 AW25 Drilling range in mm 0.7–1.9 0.7–2.25 0.7–2.4 1.75–3.0 1.75–4.0 1.75–5.25 Guideline values for processing speeds (idle)* 1,700 – 2,500 rpm 1,200 – 1,800 rpm *Contact pressure: 100 N, screw in with depth stop if necessary Nominal dia. d in mm Length l in mm pias ® steel, galva- nized, blue pass. Art. No. P. Qty. pias ® A2 Only for use in aluminum Art. No. P. Qty. 2.9 13 02062913 100/1,000 020612913 1,000 2.9 16 02062916 100/1,000 – 2.9 19 02062919 100/1,000 – 3.5 9.5 02063595 100/1,000 – 3.5 13 02063513 100/1,000 020613513 1,000 3.5 16 02063516 100/1,000 020613516 1,000 3.5 19 02063519 100/1,000 020613519 1,000 3.5 22 02063522 100/1,000 020613522 1,000 3.5 25 02063525 100/1,000 020613525 1,000 3.9 13 02063913 100/1,000 020613913 1,000 3.9 16 02063916 100/1,000 020613916 1,000 3.9 19 02063919 100/1,000 020613919 1,000 3.9 22 02063922 100/1,000 020613922 1,000 3.9 25 02063925 100/1,000 020613925 1,000 3.9 32 02063932 100/1,000 020613932 100 3.9 39 02063938 100 020613938 100 4.2 13 02064213 100/1,000 020614213 1,000 4.2 16 02064216 100/1,000 020614216 1,000 4.2 19 02064219 100/1,000 020614219 1,000 4.2 22 02064222 100/1,000 020614222 1,000 4.2 25 02064225 100/1,000 020614225 1,000 4.2 32 02064232 100/1,000 – 4.2 38 02064238 100 – 4.2 45 02064245 100 – 4.8 13 02064813 100/1,000 020614813 1,000 4.8 16 02064816 100/1,000 020614816 1,000 4.8 19 02064819 100/1,000 020614819 1,000 4.8 22 02064822 100/1,000 020614822 1,000 4.8 25 02064825 100/500 020614825 500 4.8 32 02064832 100/500 020614832 500 4.8 38 02064838 100/500 020614838 500 4.8 45 02064845 100/500 020614845 300 4.8 50 02064850 100/500 020614850 300 4.8 55 02064855 100/500 4.8 60 02064860 100/500 5.5 16 02065516 100/500 5.5 19 02065519 100/500 5.5 22 02065522 100/500 5.5 25 02065525 100 5.5 32 02065532 100 5.5 38 02065538 100 5.5 45 02065545 100 5.5 50 02065550 100 5.5 60 02065560 100 Storable in ORSY ® Type: Galvanized steel, dia. 4.2 and 4.8: General construction approval Z-14.1-4 European Technical Approval ETA 10/0184 Galvanized drilling screws may only be used where dampness is not to be expected. For fasteners with construction approval, the approval and in particular Part 2 "Special regulations" must always be observed. AW ® bits Size ¼" Bit Art. No. ⁵₁₆" Bit Art. No. AW 10 06145110 – AW 20 06145120 06145520 AW 25 06145125 06145525 SELF-TAPPING pias ® OK-00400